Two-component, two-component, constructional fast drying acrylic adhesive. Viscous, can be used on vertical surfaces.
Designed for bonding metal, ferrite alloys, ceramics, glass, plastic (except for greasy), wood, composite materials.
Resistant to air, water, oils.
The joint has sufficient elasticity to withstand shock loads, vibration, thermal expansion of the connected parts.
Polymerized glue is optically transparent, so the gluing points are invisible.
Suitable for bonding with a maximum assembly gap of 0.5 mm, with an activator it can fill gaps up to 1 mm. Not recommended for gluing greasy plastics, i.e. polyolefins (PP, PE, teflon, silicone rubber, etc.)
Store in a cool dry place at a temperature of 8 - 25°C.
Specifications:
-
color: colorless, transparent
-
setting time: 2 - 4 minutes
-
functional strength gain time: 15-30 minutes.
-
curing time: 24 hours
-
filling gap: 0.05 - 0.5 mm.
-
operating temperature range: from –30°С to+120°С
-
packing: tubes of 2 pcs in a blister
Recommended use:
Method number 1: with preliminary mixing of components
To start polymerization, it is necessary to mix components A and B of the adhesive in a 1: 1 ratio. Please note that you need to use the mixture within 1-2 minutes, before setting.
Apply the mixture to the surfaces to be bonded, then press the surfaces together.
The surfaces must be pre-cleaned and degreased.
Method number 2: without preliminary mixing of components
It is also possible not to mix the components, but simply apply component A to one surface, component B to the reciprocal bonding surface. Then press the surfaces together, this will mix the components and begin the polymerization reaction. The surfaces must be pre-cleaned and degreased.
This method gives practically unlimited time to prepare for gluing.