З 18.12.23 магазин в м.Дніпро за адресою вул.Новокримська 58 не працює.
Однак, наш інтернет-магазин відкритий для вас 24/7.
Усі місцеві замовлення можуть бути відправлені кур'єрськими службами.
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Soldering Station YIHUA-853AAA (IR heater+hair dryer+soldering iron)
Hot air soldering station based on a PCB heater. Hair dryer without compressor, for crimping nozzles. Soldering iron with HAKKO heater, power up to 75 W.
Soldering station based on an infrared preheater of printed circuit boards, additionally equipped with a hot air dryer and a tripod for its installation.
Designed for mounting and dismounting of microcircuits in BGA, SOIC, CHIP, QFP, PLCC and similar planar components small size.
Adjustable skids are provided for mounting the boards.
The maximum width of the board installed in the holder is 155 mm. The size of the heating zone is 110 mm * 110 mm.
Axial bearings are pressed into the slide, which ensures smooth movement along the guides, without jamming.
Larger boards can be stacked simply over the guides.
The heating element of the heater is ceramic, one-piece.
Temperature controller with digital display and push-button control.
Supply voltage - 220 V, 50 Hz
Maximum power - 600 W
The temperature adjustment range of the platform heating element is from+10°C to+350°C.
A hot air gun with a power of 600 W with a built-in fan, maximum air supply capacity - 120 liters per minute, temperature from 100°C to 480°C.
The set includes 4 cylindrical nozzles of various diameters of the crimp type.
The function of automatic cooling of the hot air gun after installing the hair dryer in the holder protects heating element from overheating.
Pi is disconnected the heater melts, while the fan continues to blow through the hair dryer, cooling it down to a temperature of +100°C.
Soldering iron YIHUA-907F supply voltage 24 V, power 60-75 W; temperature range from+200°C to+480°C.
antistatic design, galvanic isolation, 24 V supply voltage ensure the safety of electronic components and board.
applied ceramic heating element HAKKO 1321ensures reliable operation, durability and temperature stability.
a resistance-type soldering iron temperature sensor (built into the heater), which provides good heating dynamics and greater accuracy of temperature maintenance compared to a thermocouple, especially when working with multilayer printed circuit boards.
Supply voltage of the soldering station: 220V ±5%
Maximum power consumption 1270 W (with the bottom heating on, soldering iron and hairdryer).
All models of YIHUA soldering stations and board heaters have a 3-month warranty.
Heating elements and soldering tips are not covered by the warranty.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
