For the repair of modern designs of electronic equipment, especially portable mobile devices, special equipment is required, without which some repair operations simply cannot be performed at the proper level.
Such operations include disassembling the display module (peeling off the glass), replacing microcircuits in BGA packages, working with components in ceramic packages and on ceramic printed circuit boards. Ceramics are critical to the heating rate and high temperature gradient of the working tool.
Using the most popular methods of dismantling components using a heated air stream (hairdryer) without bottom heating of the board increases the risk of warpage of the board due to local one-sided heating.
Preheating printed circuit boards allows you to reduce the operating temperature of the thermal tool, reducing the risk of damage to components from thermal shock.
The use of YIHUA heaters with an aluminum platform for the repair of display modules is recommended by such manufacturers as SAMSUNG, LENOVO, and others.
New models of board preheaters allow you to cover a wide range of repair work. This is due to the design of the heating plate - a brushed aluminum surface.
Smooth aluminum warms up the display module evenly.
Digital temperature control using PID control algorithm ensures compliance with the technological process for almost all repairs.
The temperature is indicated on the LED display.
The temperature of the hot plate is adjustable from 50°C to 120°C.
Temperature correction function: The surface area of the aluminum plate is relatively large, its temperature may change slightly depending on the significant changes in the ambient temperature. The temperature correction function compensates for this potential discrepancy.
There is a 5V, 1A USB power socket on the front panel.
A built-in UV lamp is available to cure the UV adhesive used for gluing the module. It is installed in a drawer at the bottom of the device.
Technical data:
-
supply voltage: 220V+-10% 50 Hz
-
power consumption: 370W
-
built-in vacuum pump: 12 W
-
evacuation: 0.05 Mpa
-
heater plate size: 200 x 110 mm
-
overall dimensions: 130 x 160 x 90 mm
-
UV lamp power: 12 W
-
USB output: 5V, 1A
Warranty obligations for all models of soldering stations and board heaters are 3 months.
The warranty does not cover heating elements and soldering tips, which are consumables.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
