З 18.12.23 магазин в м.Дніпро за адресою вул.Новокримська 58 не працює.
Однак, наш інтернет-магазин відкритий для вас 24/7.
Усі місцеві замовлення можуть бути відправлені кур'єрськими службами.
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Ceramic heating element for low-voltage soldering irons type 907 from all manufacturers, with built-in thermocouple (soldering irons from soldering stations).
Structurally, the heater is a spiral made of thin nichrome wire wound on a ceramic rod and placed in a ceramic tube-sheath. The front end of the tube is plugged either with a ceramic compound or with a plug also made of ceramic in the form of a fungus.
Characteristics:
rod length - 60 mm
diameter - 3.7 mm
type of built-in temperature sensor: thermocouple
In a working element, the resistance between the heater terminals is 11-16 Ohms, the resistance between the thermocouple terminals is about 0.5 Ohms. When replacing the heater, pay attention to the polarity of the thermocouple connection.
Lead color coding: heating element wires are one-color (usually red), thermocouple wires are of different colors.
Attention!this heater cannot be installed in soldering irons for stations designed to work with a heater of the HAKKO-1321 type. This is due to the incompatibility of the temperature sensors.
In the heating elementHAKKO-1321a thermistor is used as a temperature sensor, not a thermocouple.
The question often arises: how to distinguish a nichrome heater with a thermocouple from an elementPTC type with thermistor?
First of all, in appearance. The nichrome heater has a smooth ceramic sheath. The PTC-type heater has a characteristic longitudinal groove along the entire length of the rod, which is clearly visible even on the remnants of a destroyed element.
If the element is destroyed, then the presence of remnants of a nichrome coil clearly indicates the type of heater. PTC-type heaters do not have a coil wire inside.
You can also navigate by electrical parameters by measuring the resistance, but this must be done in advance while the soldering iron heater is in working order.
Нагреватель низкого качества - магнитится. Нихром не магнитится (например - родной нагреватель у моей Lukey-702 не магнитится). Это какой-то китайский заменитель нихрома, по отзывам, такой нагреватель служит не более полугода
По каким отзывам? Где Вы тут видите такие отзывы? Это Ваше личное впечатление о конкретно купленном здесь нагревателе (когда Вы у нас его купили, кстати?), или Вы решили пересказать чьё-то мнение о каком-то нагревателе, взятое на из интернета? Мы эти нагреватели уже несколько лет продаём, и никто, как видите, не жалуется на качество. Вообще сама идея определять качество нагревателя магнитом вызывет, мягко говоря, удивление. Что же касается понятие "китайский" - так вообще-то станции Lukey все производятся в Китае. И Вы представляете, в них установлены китайские нагреватели! )))
Могу точно сказать, что у моего паяльника нихром в керамике, сопротивлениеоколо 14Ом. Мне кажется, что у меня встроена термопара, но прозвонить нет возможности, так как именно в термодатсчике и есть проблема - во всяком случае, в режиме мультиметра 200 МОм - - бесконечность
Здравствуйте. Подойдет ли этот нагреватель к паяльной станции YAXUN 881D ?
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown