Soldering Station T12-956, OLED-1.3", 108W, T12 tip

Изображение товара

Product description format_size zoom_out zoom_in

• Power 108W
• Heating up to 300°С in 20 seconds
• The ability to fine-tune the controller operation
• Sleep and wake up modes: automatic and manual
• Setting the heating rate
• Setting the step of temperature change up to 1°С
• Memory function of the set mode
• Aluminum body
• Small case size 120 x 88 x 38 mm
• Built-in OLED screen

Soldering stations equipped with replaceable T12 cartridges (tips) do an excellent job of soldering arrays with high heat capacity. The thermocouple is integrated directly into the heater, there is no gap between the heater and the tip metal. This design provides an instant response to a drop in tip temperature and adds the energy needed to maintain the set temperature.

Soldering station complete set:
1. Control and power unit
2. The handle of the soldering iron is extended for removable tips of the T12 type
3. Replaceable cartridge T12-K (knife blade)
4. Power cable

Getting started:
1. Insert the cartridge (tip) into the soldering iron and fix it
2. Connect the cable of the soldering iron to the control and power unit
3. Place the soldering iron in the stand
4. Connect the power cable to the back of the power and control unit
5. Switch the power switch on the back of the power and control unit

To go to the setup menu, you need to press the encoder (temperature regulator) on the front of the power supply and control unit of the soldering station, and hold it for a few seconds.